Jeep Wrangler JK Dual Battery Tray DIY Kit 2012-2018 Wrangler JK
For the do-it-yourself guys, we now offer our high quality battery tray as a stand alone kit. If you would like to use your own battery isolator and do the wiring yourself, or if you have specific needs that our full-featured kit does not meet, now you can get the bare battery tray and top lid alone. This kit comes with no components mounted onto the top lid, but you still get all the hardware you need to install it into your Jeep Wrangler JK.
The kit includes everything you need to install the tray:
- CNC laser cut and CNC bent steel battery tray
- Top lid with grommets for routing your wires
- Rubber caps over the pressed-in studs - you can use them or remove them
- New rubber fuel hoses to relocate your evap solenoid
- Hose clamps for the fuel hose
- Stainless hardware to secure the top lid
- Caps for the threaded studs on the firewall
- Powder coated for durability
- Integrated fuse box holder and evap solenoid holder
Follow our detailed instructions for installing the battery tray, then finish it off with your own custom wiring solution.
NOTE: 2007-2011 model years require a short extention cable for the evap solenoid. The extension is made with OEM connectors and wires to ensure a perfect watertight fit for easy installation. This piece is not required on 2012-2018 JKs. Be sure to specify your year model when ordering.
Battery Options:
- Any Group 34 battery will fit our tray
- NOTE: Batteries ordered through Genesis Offroad will ship separately from the tray due to shipping regulations.
- Odyssey ODX-AGM34 is for those who need the most capacity possible! 850 CCA, 68 aH, and 135 minute reserve time
- Full River FT825-34 boasts 825CCA, 65aH capacity, and 135 minute reserve time
- The original factory battery will not fit due to its larger size
- Both batteries must be the same physical size for the top lid to securely hold them in place
Batteries sold separately. Matching Group 34 batteries are required.